Why waste money on psychotherapy when you can listen to the B Minor Mass? Michael Torke

KODUKINO / AV ressiiverid

9.2-kanaliga kodukino ressiiver juba uue Dolby Atmos® multidimensionaalse heli võimalusega. HDMI® 4K/60 Hz Video ja HDCP 2.2 valmidus.

1999 € / tk

Kirjeldus

Get tomorrow’s high-impact entertainment today with the TX-NR1030. Separate amp and processing blocks, a massive high-current transformer, seven Burr-Brown DACs, and dual 32-bit DSP engines provide a solid foundation for Dolby Atmos®, the revolutionary surround-sound format adding a new dimension to movie soundtracks. Originally developed for use in multiplex theaters, Dolby Atmos uses object-oriented mixing and ceiling channels to move directional effects around and above you in a seamless sphere of living sound. Balanced front XLR and 11.4-multichannel pre-outs and 8-in/3-out 4K/60 Hz HDMI® 2.0 terminals supporting HDCP 2.2-copy-protected 4K internet video provide ultimate connectivity for your future-ready home cinema. The TX-NR1030 is also engineered for breathtaking stereo performance with Wi-Fi® and Bluetooth opening a world of wireless digital music, from hi-res music streaming through to Spotify, while Pure Direct Analog Path puts soulful analog sound right up there with dedicated hi-fi amps. On top of all this, there’s DTS Neo:X™ upmixing, 4K video upscaling, ISF video calibration, and smartphone control in every zone. It’s simply the best-equipped, best-sounding 9.2-channel solution available for next-generation entertainment.


Tootja kodulehe: Link

UUS! Dolby Atmos® multidimensionaalset heli tutvustav: Link

 

Andmed

Amplifier Section  

Power Output
All Channels

185 W/Ch (6 Ω, 1 kHz, 1% THD,
1 Channel Driven, IEC)
230 W/Ch
(6 Ω, 1 kHz, 1 Channel Driven, JEITA)

Dynamic Power

300 W (3 Ω, Front)
250 W (4 Ω, Front)
150 W (8 Ω, Front)

THD+N (Total Harmonic Distortion + Noise) 0.08 % (20 Hz–20 kHz, Half Power)
Damping Factor 60 (Front, 1 kHz, 8 Ω)
Input Sensitivity and Impedance

200 mV/47 kΩ (Line)
2.5 mV/47 kΩ (Phono MM)

Rated RCA Output Level and Impedance 200 mV/470 Ω (Pre Out)
Maximum RCA Output Level and Impedance

4.6 V/470 Ω (Pre Out)

Rated XLR Output Level and Impedance 400 mV/470 Ω (Pre Out)
Maximum XLR Output Level and Impedance) 9.2 V/470 Ω (Pre Out)
Phono Overload 70 mV (MM, 1 kHz, 0.5%)
Frequency Response

5 Hz–100 kHz/+1 dB, -3 dB (Direct Mode)

Tone Control

±10 dB, 50 Hz (Bass)
±10 dB, 20 kHz (Treble)

Signal-to-Noise Ratio

110 dB (Line, IHF-A)
80 dB (Phono MM, IHF-A)

Speaker Impedance 4 Ω – 16 Ω or 6 Ω – 16 Ω
Video Section  

Input Sensitivity/Output Level and Impedance
Video

1.0 Vp–p/75 Ω (Component Y)
0.7 Vp–p/75 Ω (Component PB/CB, PR/CR)
1.0 Vp–p/75 Ω (Composite)

Component Video Frequency Response 5 Hz–100 MHz/+0 dB, -3 dB
Tuner Section  

Tuning Frequency Range
FM
AM

87.5 MHz–108 MHz
522 kHz–1,611 kHz

FM/AM Preset Memory 40 Stations
General  
Power Supply  AC 220−240 V~, 50/60 Hz 
Power Consumption 955 W 
No-Sound Power Consumption 125 W
Standby Power Consumption 0.12 W 
Dimensions (W x H x D)

435 x 199 x 466.5 mm
(Height 259 mm with antennas raised)

Weight 20.5 kg 
 
Andmed