Why waste money on psychotherapy when you can listen to the B Minor Mass? Michael Torke

KODUKINO / AV ressiiverid

UUS 7.2-kanaliga kodukinoresiiver, DTS:X™ and Dolby Atmos® Support, THX®, 384 kHz/32-bit DAC for Hi-Res Audio

1299 € / tk
Hõbe  Must 

Kirjeldus

7.2-Channel Network A/V Receiver

Focused Power with Masterful Sound Control

 

The all-new TX-RZ800 is designed for today's audiophile: separate amp and processing blocks, custom high-current transformer, custom capacitors, Asahi Kasei 384 kHz/32-bit DAC, discrete low-impedance amp circuitry, and a 32-bit digital signal processor to extract every drop of performance from DTS:X™ and Dolby Atmos® soundtracks. The high-current amp grips the speaker drivers with steady control for effortlessly clear sound that extends down to 5 Hz without phase shifting, meaning you enjoy a perfectly focused audio image and earth-shaking bass. Combine this with original Vector Linear Shaping Circuitry™ (VLSC) technology—which cleanses the signal of pulse noise—and you have a receiver that just begs to be turned up to THX® Reference levels, whether you're playing an object-based movie soundtrack over the latest spec HDMI® terminals or an album wirelessly over AirPlay. The TX-RZ800 adds pure sonic excitement to the latest in UltraHD entertainment.


Tootja kodulehe: Link

 

Andmed

Amplifier Section  

Power Output

All Channels

 

185 W/Ch (6 Ω, 1 kHz, 1% THD, 1 Channel Driven, IEC)

230 W/Ch (6 Ω, 1 kHz, 1 Channel Driven, JEITA)

Dynamic Power

300 W (3 Ω, Front)

250 W (4 Ω, Front)

150 W (8 Ω, Front)

THD+N (Total Harmonic Distortion + Noise) 0.08% (20 Hz–20 kHz, Half Power)
Damping Factor Over 40 (Front, 1 kHz, 8 Ω)
Input Sensitivity and Impedance

200 mV/47 kΩ (Line)

3.5 mV/47 kΩ (Phono MM)

Rated RCA Output Level and Impedance

1.0 V/470 Ω (Pre Out)

1.0 V/470 Ω (Subwoofer Pre Out)

100 mV/2.2 kΩ (Zone Out)

1.0 V/2.2 kΩ (Zone Pre Out)

Phono Overload 70 mV (MM, 1 kHz, 0.5%)
Frequency Response 5 Hz–100 kHz/+1 dB, -3 dB (Direct Mode)
Tone Control

±10 dB, 20 Hz (Bass)

±10 dB, 20 kHz (Treble)

Signal-to-Noise Ratio

106 dB (Line, IHF-A)

80 dB (Phono MM, IHF-A)

Speaker Impedance 4 Ω – 16 Ω
Video Section  

Input Sensitivity/Output Level and Impedance

Video

1.0 Vp–p/75 Ω (Component Y)

0.7 Vp–p/75 Ω (Component PB/CB, PR/CR)

1.0 Vp–p/75 Ω (Composite)

Component Video Frequency Response 5 Hz–100 MHz/+0 dB, -3 dB
Tuner Section  

Tuning Frequency Range

FM

AM

 

87.5 MHz–108 MHz

530 kHz–1,710 kHz

522 kHz–1,611 kHz

FM/AM Preset Memory 40 Stations
General  
Power Supply AC 220~240 V, 50/60 Hz
No-Sound Power Consumption 90 W
Standby Power Consumption 0.2 W
Dimensions (W x H x D)

435 x 201.5 x 433.5 mm

(Height 261.5 mm with antennas raised)

Weight 17 kg
 
Andmed