Why waste money on psychotherapy when you can listen to the B Minor Mass? Michael Torke

STEREO / Vinüül/LP

Elegantse välimuse ja paljudes toonides TH-300 vinüülplaadimängija.

399 € / tk
Punane  Naturaalne puit  Kirss  Must  Valge 

Kirjeldus

The TN-300 is a belt-drive analog record player with a stylish and luxurious chassis containing an MM Phono equalizer amplifier with USB output. The TN-300 supports Phono and Line output, which allows you to play vinyl with a stereo that isn’t equipped with Phono input, and Phono equalizer amplifier of your hands. You can transfer music from vinyl records to your Mac or PC, using the USB digital output. CD quality digital archiving with the USB output preserves your vinyl collection and also allows you to enjoy vinyl records with a smartphone or Digital Audio Player. Using audio-technica’s AT95E VM cartridge, the TN-300 lets you enjoy high accuracy tracking sounds as soon as you set up. An aluminum die-cast, High inertia platter has also been attached. The TN-300 is the perfect turntable for any music lover, from first time users to audiophiles, who appreciates high quality sounds and sturdy yet stylist design.


Tootja kodulehe: Link

 

Andmed

Turntable section  
Drive System Belt Drive
Motor DC Motor
Speed 33 1/3 RPM, 45 RPM
Rotation Speed Variation +/–2%
Wow and Flutters 0.2%
ignal-to-Noise Ratio 67dB or higher (A-weighted, 20kHz LPF)
60dB or higher (unweighted, 20kHz LPF)
Platter Aluminum Die-cast
Diameter of Platter 12", 30cm
Tonearm section  
Type Static Balance, Straight
Effective Arm Length 8.8", 223mm
Stylus Pressure Range 0 to 5g
Supported Cartridge Weight 3.5 to 8.0g 
Anti-skating Adjustment  Supported 
Cartridge section   
Type  MM type (audio-technica AT95E factory installed) 
Stylus Shape  Elliptical 
Stylus Construction  Bonded Round Shank 
Mount  Half inch 
Frequency Response  20Hz to 20kHz 
Channel Separation  20dB at 1kHz 
Channel Balance  2.0dB 
Tracking Force  1.5 to 2.5g 
Vertical Tracking Angle  20 degrees 
Supported Load Impedance  47k ohms 
Output Voltage  4.5mV +/–3dB 
Stylus Pressure  2.0g +/–0.5g 
Cartridge Weight  5.7g +/–0.5g 
Head-shell Weight  10g (including Screws, Nuts and Wires) 
Replacement Stylus  audio-technica ATN95E 
Phono Equalizer Amplifier   
Type of Amplifier  MM type (On/Thru switchable) 
Analog Output   
Connector  RCA Pin jack (Gold-plated) 
Output Voltage  Phono/Line switchable
Phono Output  4.5mV +/–3dB 
Line Output  120mV (–13dBV) 
USB Output section   
Connector  USB B type 
Output Signal  PCM 48kHz/16-bit 
Supported OS  Windows 7, Windows 8, Windows 8.1, OS X Lion(10.7), OS X Mountain Lion(10.8), OS X Mavericks(10.9) 
Power  AC 100 to 240V, 50/60Hz 
Power Consumption  1.5W (less than 0.5W at Standby) 

Overall Dimensions
(W x H x D)

 16.5" x 4.6" x 14.0"
420 x 117 x 356 mm
Weight  Approx. 10.8 lbs.  4.9 kg 
Accessories  Rubber Sheet, EP Adapter, Counter Weight,  Head-shell (audio-technica AT95E), Platter, Dust Cover, Rubber Feet fro Dust Cover x2, Hinge x2, RCA Audio Cable, USB Cable, AC Adapter (GPE053A-120050-Z), Owner's Manual (including Warranty Card) 
 
Andmed